LOWELL MANUFACTURING
LOWELL MANUFACTURING VR-2 Rack-Vertical Hold, 2u VR-2
- UPC:
- 811405032509
- MPN:
- VR-2
- Shipping:
- Calculated at Checkout
Description
16-gauge steel
Mount to wall or desk
Holds equipment vertically or horizontally
One-pair mounting rails tapped 10-32
Two rear obrounds for cable management
Pilot Point screws with captive washers
Smooth black powder epoxy finish
Use two racks together for four-point mounting
View AllClose
Related Products
Related Products
LOWELL MANUFACTURING VR-3 Rack-Vertical Hold, 3u VR-3
LOWELL MANUFACTURING
MSRP:
$156.00
$137.28
16-gauge steel
Mount to wall or desk
Holds equipment vertically or horizontally
One-pair mounting rails tapped 10-32
Two rear obrounds for cable management
Pilot Point screws with captive...
LOWELL MANUFACTURING VR-4 Rack-Vertical Hold, 4u VR-4
LOWELL MANUFACTURING
MSRP:
$176.00
$154.88
16-gauge steel
Mount to wall or desk
Holds equipment vertically or horizontally
One-pair mounting rails tapped 10-32
Two rear obrounds for cable management
Pilot Point screws with captive...
LOWELL MANUFACTURING LVC8P-ID-2 Rack Panel For Volume Controls-2u, Blk LVC8P-ID-2
LOWELL MANUFACTURING
MSRP:
$64.20
$56.50
16-gauge steel
PocketID™ polycarbonate window for paper label (not included)
Eight (8) punches for volume controls. Accepts up to 8 standard volume controls (or 4 wide body in alternate...
LOWELL MANUFACTURING SVP-2 Rack Panel-Vented-2u, 18ga Flanged Perforated Steel, Blk SVP-2
LOWELL MANUFACTURING
MSRP:
$33.00
$29.04
Material: 18-gauge steel
Finish: Smooth black semi-gloss
Flange: 0.625 in.
Small Holes: 0.0781 in. diameter on 0.125 in. staggered centers
Open Area: 35 percent
Width: 19 in.
LOWELL MANUFACTURING SEP-2 Rack Panel-Blank-2u, 18-Gauge Flanged Steel, Blk SEP-2
LOWELL MANUFACTURING
MSRP:
$21.40
$18.83
Material: 18-gauge steel
Finish: Smooth black semi-gloss
Flange: 0.625 in.
Width: 19 in.
Height: 1/3U–6U
Made in USA
LOWELL MANUFACTURING US-214 Rack Utility Shelf-2u, 14in D, Blk US-214
LOWELL MANUFACTURING
MSRP:
$100.80
$88.70
Material: 16-gauge steel
Finish: Smooth black
Front and rear flanges
LOWELL MANUFACTURING USV-214 Rack Utility Shelf-Vented, 2u, 14in D, Blk USV-214
LOWELL MANUFACTURING
MSRP:
$103.20
$90.82
16-gauge steel with fully vented base
Smooth black
Front Flange: 0.375 in.
Rear Flange: 0.562 in.
Slotted rear flange (0.56") provides tie-off points for cable management and notches to mount an...
LOWELL MANUFACTURING WXR-2212 Rack-Wall Mount-22u, 12in Deep, Blk WXR-2212
LOWELL MANUFACTURING
MSRP:
$348.00
$306.24
14-gauge steel top and base
11-gauge steel corner post rails tapped 10-32 (1 pr.)
Upper and lower front vents
Open sides with obrounds in top/base for cable management
Smooth black powder epoxy...
LOWELL MANUFACTURING WXR-812 Rack-Wall Mount-8u, 12in Deep, Blk WXR-812
LOWELL MANUFACTURING
MSRP:
$304.00
$267.52
14-gauge steel top and base
11-gauge steel corner post rails tapped 10-32 (1 pr.)
Upper and lower front vents
Open sides with obrounds in top/base for cable management
Smooth black powder epoxy...