LOWELL MANUFACTURING
LOWELL MANUFACTURING LVC8P-ID-2 Rack Panel For Volume Controls-2u, Blk LVC8P-ID-2
- UPC:
- 811405031373
- MPN:
- LVC8P-ID-2
- Shipping:
- Calculated at Checkout
Description
16-gauge steel
PocketID™ polycarbonate window for paper label (not included)
Eight (8) punches for volume controls. Accepts up to 8 standard volume controls (or 4 wide body in alternate positions)
Hardware and black plugs for unused positions
Rear lacing flange for wire management
Smooth black powder epoxy finish
View AllClose
Related Products
Related Products
LOWELL MANUFACTURING SVP-2 Rack Panel-Vented-2u, 18ga Flanged Perforated Steel, Blk SVP-2
LOWELL MANUFACTURING
MSRP:
$33.00
$29.04
Material: 18-gauge steel
Finish: Smooth black semi-gloss
Flange: 0.625 in.
Small Holes: 0.0781 in. diameter on 0.125 in. staggered centers
Open Area: 35 percent
Width: 19 in.
LOWELL MANUFACTURING SEP-2 Rack Panel-Blank-2u, 18-Gauge Flanged Steel, Blk SEP-2
LOWELL MANUFACTURING
MSRP:
$21.40
$18.83
Material: 18-gauge steel
Finish: Smooth black semi-gloss
Flange: 0.625 in.
Width: 19 in.
Height: 1/3U–6U
Made in USA
LOWELL MANUFACTURING VR-2 Rack-Vertical Hold, 2u VR-2
LOWELL MANUFACTURING
MSRP:
$136.00
$119.68
16-gauge steel
Mount to wall or desk
Holds equipment vertically or horizontally
One-pair mounting rails tapped 10-32
Two rear obrounds for cable management
Pilot Point screws with captive...
LOWELL MANUFACTURING US-214 Rack Utility Shelf-2u, 14in D, Blk US-214
LOWELL MANUFACTURING
MSRP:
$100.80
$88.70
Material: 16-gauge steel
Finish: Smooth black
Front and rear flanges
LOWELL MANUFACTURING USV-214 Rack Utility Shelf-Vented, 2u, 14in D, Blk USV-214
LOWELL MANUFACTURING
MSRP:
$103.20
$90.82
16-gauge steel with fully vented base
Smooth black
Front Flange: 0.375 in.
Rear Flange: 0.562 in.
Slotted rear flange (0.56") provides tie-off points for cable management and notches to mount an...
LOWELL MANUFACTURING SVP-1 Rack Panel-Vented-1u, 18ga Flanged Perforated Steel, Blk SVP-1
LOWELL MANUFACTURING
MSRP:
$26.60
$23.41
Material: 18-gauge steel
Finish: Smooth black semi-gloss
Flange: 0.625 in.
Small Holes: 0.0781 in. diameter on 0.125 in. staggered centers
Open Area: 35 percent
Width: 19 in.
LOWELL MANUFACTURING SEP-3 Rack Panel-Blank-3u, 18-Gauge Flanged Steel, Blk SEP-3
LOWELL MANUFACTURING
MSRP:
$24.40
$21.47
Material: 18-gauge steel
Finish: Smooth black semi-gloss
Flange: 0.625 in.
LOWELL MANUFACTURING SEP-1 Rack Panel-Blank-1u, 18-Gauge Flanged Steel, Blk SEP-1
LOWELL MANUFACTURING
MSRP:
$15.80
$13.90
Blank panel for 19" E.I.A. racks is 18-gauge steel with flange
for strength and rigidity.
18-gauge certified U.S. steel
Smooth black semi-gloss powder epoxy finish
0.625" flange
LOWELL MANUFACTURING WXR-2212 Rack-Wall Mount-22u, 12in Deep, Blk WXR-2212
LOWELL MANUFACTURING
MSRP:
$348.00
$306.24
14-gauge steel top and base
11-gauge steel corner post rails tapped 10-32 (1 pr.)
Upper and lower front vents
Open sides with obrounds in top/base for cable management
Smooth black powder epoxy...