Thor H-1HDMI-ATSC-IPLL 1-Channel HDMI to ATSC Low Latency Encoder Modulator with IPTV Streaming

In Stock - Free Shipping!
Calculated at Checkout
  • Thor Fiber H-1HDMI-ATSC-IPLL 1-Channel HDMI to ATSC Low Latency Encoder Modulator IPTV Streaming - front panel
  • Thor Fiber H-1HDMI-QAM-IPLL 1-Channel HDMI to QAM Low Latency Encoder Modulator IPTV Streaming - rear panel connections
  • Thor HDMI to QAM Low Latency Encoder Modulator with IPTV Streaming - Application Drawing
MSRP: $2,495.00
— You save $746.00


The Thor QAM H-1HDMI-ATSC-IPLL Low Latency encoder modulator is a multi-dynamic tool used to distribute any live HDMI video source such as a cable TV STB, DVD player, Digital Signage Device etc, and broadcast that video on your own RF channel over your existing coax infrastructure. This easy to use encoder modulator is useful for any type of high quality video encoding & distribution that necessitates ultra-low latency feature that will reduce average encoding speeds from 1200-1600ms down to 70-250ms. This unit can be just an encoder, a modulator, an IPTV server, or all 3 at once. Units range from 1-4 channels and are compatible with any HDMI source that will output an RF channel with perfect HD quality video up to 1080p60 that encodes in either MPEG-2 or H.264. Creating your headend with dozens of channels can be easily accomplished by stacking several units and daisy chaining the RF in’s & out’s, or by using an external RF combiner.


  • Conversions : HDMI to RF, HDMI to IP, HDMI to ASI
  • Any HDMI Input up to 720p/1080i/1080p60
  • Licensed HDMI inputs with HDCP
  • Fully IP control and Network Management through browser
  • Front Panel LCD local control
  • IPTV Output Unicast or Multicast IGMP UDP
  • ASI Output with multiplexer cherry picking
  • Low Latency available 70-120ms
  • AC3 Audio available (AC3 model)
  • MPEG2 Video or MPEG4 H.264 Encoding
  • Encodes in MPEG-2 or H.264 video codecs at 0.5 - 19 Mbps
  • Firmware for ATSC, DVB-T, DVB-S2 Available
  • 2 slot design – Other Video Inputs cards available –Hot swappable - SDI Card, YpbPr Card.
  • 5 Year warranty


  • Input: HDMI 1.5a up to 1080P60
  • Supported Resolutions: 1280x720P 60 / 59.94 / 50 Hz 1920x1080I 60 / 59.94 / 50 Hz H.264 Codec ONLY 1920x1080P 60 / 59.94 / 50 Hz
  • Video Codecs: MPEG-2 HD 1.5-19.5 Mbps H.264 HD 0.8-19.5 Mbps
  • Audio Codecs: MPEG-1 Layer II MPEG-2 AAC MPEG-4 AAC, AC3 Dolby avaiable on specific models
  • Audio Sample Rate: 48 kHz
  • Audio Bit Rates: 64 kbps, 96 kbps, 128 kbps, 192 kbps, 256 kbps, 320 kbps
  • Modulation Standard: QAM - J.83A, J.83B, J.83C. Firmware for ATSC or DVB-T available
  • RF Frequency Range: 30-960 MHz 1 KHz Step
  • RF Power Level: 5 - 35 dBmV Adjustable
  • DVB-ASI Output: BNC Connector: 1-60 Mbps
  • DVB-ASI Input: BNC Connector: 1-120 Mbps Programs Selected by PID Programs Muxed to all Outputs
  • IPTV Output: MPEG-TS MPTS over UDP Unicast and Multicast Supported
  • Cables Included: 1 to 4 HDMI Cables, Power Cords
  • Dimensions: 482 x 300 x 44 mm
  • Weight: 4.5 kg
  • Operating Temperature: 0 - 45 C
  • Power Input: 100-240 VAC Auto Switching ~ 20 W 
View AllClose

Warranty Information

Thor Warranties the H-1HDMI-ATSC-IPLL 1-Channel HDMI to ATSC Low Latency Encoder Modulator with IPTV Streaming for 5 years.
View AllClose