16-gauge steel with fully vented base
Smooth black
Front Flange: 0.375 in.
Rear Flange: 0.562 in.
Slotted rear flange (0.56") provides tie-off points for cable management and notches to mount an...
Material: 18-gauge steel
Finish: Smooth black semi-gloss
Flange: 0.625 in.
Small Holes: 0.0781 in. diameter on 0.125 in. staggered centers
Open Area: 35 percent
Width: 19 in.
16-gauge steel
Mount to wall or desk
Holds equipment vertically or horizontally
One-pair mounting rails tapped 10-32
Two rear obrounds for cable management
Pilot Point screws with captive...
16-gauge steel
Mount to wall or desk
Holds equipment vertically or horizontally
One-pair mounting rails tapped 10-32
Two rear obrounds for cable management
Pilot Point screws with captive...
Heavy gauge steel construction
Front gate swings open 90 degrees (left or right)
Quick release detent pins secure frame closed
Mounting holes on 16 in. centers
Open sides and multiple tie loop points...
16-gauge steel
Keyhole mounting slots on 16 in. stud centers
Install with equipment platform on top or bottom.
Two oblong cutouts (2.5 in. x 1.25 in.) for cable drop-down
Large center cutout in back...
Mixer with 125W amplifier
Powered via switchable 115 or 230 VAC @ 50/60Hz or 24VDC
Five channel volume controls
Treble and bass controls
Master volume control
Main power switch
LED display bank for...
Main AC input is protected by a circuit breaker
30W maximum power output
Single NEMA receptacle in rear (unswitched, always on)
First channel (MIC/TEL) is switchable for microphone or telephone...