Audioengine B2 Premium Bluetooth Speaker - Walnut (B2-WAL)
- In Stock - FREE SHIPPING!
- Calculated at Checkout
Audioengine B2 Premium Wireless Bluetooth Speaker - Walnut (B2-WAL)
Wirelessly stream all your music from any Bluetooth®-enabled device directly to the B2 wireless speaker. The B2 brings the signature sound of the Audioengine 2+ Powered Desktop Speakers to the wireless world in a convenient all-in-one stereo speaker system. Experience award-winning Audioengine® stereo sound, including a hand-built wood cabinet, Bluetooth® aptX® and extended wireless range. Music from your computer, smartphone, or tablet never sounded so good.
- Streams audio from any Bluetooth enabled device
- Easy setup, connects in seconds
- No network setup, no passwords, no hassle
- Superior sound and extended range
- Custom Kevlar woofers and silk tweeters
- Hand-built wood cabinet
- Dual front port slots for extended bass
- Acoustically isolated cabinet design with detachable magnetic grill
- Aux audio input
- Integrated power supply
See and hear the difference!
The hand-finished wood cabinet of the B2 reflects traditional Audioengine design and the high-quality components and audio fidelity are typical of Audioengine's commitment to great sound at affordable prices. The Audioengine B2 continues to close the gap between your computer music and home hi-fi and even if you're not an audio enthusiast we guarantee your music will sound better!
- Any Bluetooth-enabled computer or other device
- Any music system with an audio input
What’s in the box:
- B2 Bluetooth® Speaker - Walnut
- Power cable
- Microfiber speaker bag
- Quickstart guide
Powered stereo Bluetooth speaker system
Amplifier type: Dual class AB monolithic
Power output: 60W peak total (15W RMS, 30W peak per channel), AES
2.75” Kevlar woofers
3/4“ Silk dome tweeters
- 3.5mm stereo mini-jack (analog)
Analog input impedance: 10K ohms unbalanced
Frequency response: 65Hz-22kHz (±2.0dB)
SNR: >95db (typical A-weighted)
THD+N: <0.05% at all power settings
Power filtering: 3-stage redundant regulation
Input voltages: 100-240V, 50/60Hz auto-switching
Protection: Output current limiting, thermal over-temperature, power on/off transient protection
Bluetooth receiver type: Bluetooth 4.0 audio with aptX codec
Supported Bluetooth profiles:
Wireless operation range: up to 100ft (30m) typical
D/A converter: TI PCM5102A
Input bit depth: 24-bit (upsampled)
Input data rate: Determined by Bluetooth
Wireless latency: ~30 milliseconds (ms)
Product dimensions: 4.25”(H) x 12.25”(W) x 5.50”(D)
Shipping weight: 10lbs (4.6kg)
Shipping box dims: 10.5” (H) x 16” (W) x 7.5” (D)
- Operating temperature: 24° to 105°F (0°C to 40°C)
- Storage temperature: -4° to 115°F (-20°C to 46°C)
- Relative humidity: 5% to 95% non-condensing
Materials and Construction:
- 6.5mm thick MDF cabinets with real wood veneer
- 3/4" silk dome tweeters with neodymium magnets
- 2.75" Kevlar woofers with advanced voice coils
- Power cable
- Microfiber speaker bag
- Quickstart guide
Digital-to-analog converter characteristics
The B2 Bluetooth speaker system utilizes the TI PCM5102A DAC, widely know for it's low noise and high fidelity. Due to the PCM5102A's high signal-to-noise specs, the fact that digital signal is converted (upsampled) to 24-bits and the added benefit of triple redundancy power source conversion and filtering, the B2 presents impressive low noise and low distortion characteristics with a noticeable improvement over other Bluetooth speakers.
Extended wireless range
Most Bluetooth speakers have very limited range, usually within just one room. But with careful signal management circuitry and antenna tuning, we offer a superior solution that will reach more than one room with no degradation in audio quality.
High quality Bluetooth audio
The B2 features aptX coding which is an advanced Bluetooth audio codec that provides much higher-quality sound than previous versions. The B2 is backwards-compatible with all previous Bluetooth implementations so you can wirelessly stream music from any device and still enjoy outstanding sound.
Custom-built audio components
Audioengine designs and manufactures our own tweeters, woofers, and many other critical components. In other words, these are not "box built" speakers with off-the-shelf parts but entirely designed to our specifications. What we do not fabricate directly in our factories we have custom-made to our specifications (parts such as toroidal transformers, magnets, and wiring harnesses, for example). The speaker cabinets, drivers, bass port designs, amplifiers, and crossovers are all painstakingly tuned together for each Audioengine model. This, in turn, makes for a much more efficient system that requires much less power than traditional AV stereo receivers and passive speakers.
Based on studio monitor designs
Studio monitor speakers are used by producers and engineers in recording and production studios. They are designed with a theoretical flat frequency response which allows the engineer to create a final mix in such a way that the recorded music will sound good on most other speakers. Although Audioengine speakers are not designed to be up-close "nearfield" studio monitors, we do carry over much of the same higher-end technology, components, and design philosophy for all Audioengine speaker systems.
Audioengine uses audiophile-quality, ferro fluid cooled, silk dome tweeters with neodymium magnets. Silk tweeters hold up well under high power and the edge-driven design gives very smooth response. The custom woofers are Kevlar woven glass aramid composite with rubber surrounds. Kevlar is obviously very strong, which means that the woofer retains its shape when being driven at high levels. The speaker materials and construction are very robust, therefore speaker grills aren’t needed. In other words, we did our homework on the speaker drivers and they will sound and look great after many years of use.
To minimize unwanted resonances and distortion, Audioengine cabinets have thick high-resin MDF walls with extensive internal bracing. Heavy internal sound-damping material is also used to reduce unwanted sound reflections inside the cabinet. The B2 cabinet is a unique design in that it has dual sub-enclosures to prevent cross-interference, while each side contains its own tuned, front-port bass slot.
The class A/B amplifiers in Audioengine speaker systems are very conservatively-rated analog designs. Each subsystem is tuned together for all models, providing a much more efficient system requiring less power than passive speakers and separate amplifiers. An auto-standby idle mode is also included to conserve power when you're not playing music.
Both drivers are magnetically-shielded which allows protection for CRT displays and hard-drive music players.