Transition Networks
Transition Networks Stand-alone Fast Ethernet PoE Media Converter SPOEB1011-105-NA
- UPC:
- 648177039814
- MPN:
- SPOEB1011-105-NA
- Shipping:
- Calculated at Checkout
Description
SPOEB10xx-105 is a 10/100 Ethernet copper to fiber PoE media converter that enables enterprises to provide power to network devices over the existing CAT5 data connection.
Transition Networks' AC powered PoE media converters combine data received over a fiber optic link with
-48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input.
This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities.
In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset.)
The PoE converter is fully compatible with devices that comply with the IEEE
802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI.
View AllClose
Transition Networks' AC powered PoE media converters combine data received over a fiber optic link with
-48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input.
This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities.
In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset.)
The PoE converter is fully compatible with devices that comply with the IEEE
802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI.
- For efficient encoding/decoding of data into light pulses and then sending them to the other end as electrical signals for a dependable photoelectric conversion
- With Optical Fiber cable, get the desired data transfer rate up to a required distance
- Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter
- With 10/100Base-TX technology get up to 100Mbps data transfer rate over twisted pair cable
- Tuck the device out of the way with its Wall Mounting feature
Additional Information
Product Type: |
Transceiver/Media Converter |
DVI: |
No |
Manufacturer: |
Transition Networks, Inc |
Product Model: |
SPOEB10xx-105 |
Management Port: |
No |
Maximum Distance Supported: |
1.24 Mile |
Media Type Supported: |
Optical Fiber,Twisted Pair |
Fiber Mode Supported: |
Multi-mode |
Country of Origin: |
Taiwan |
Number of ST Ports: |
1 |
Network Technology: |
10/100Base-TX,100Base-FX |
ST Port Type: |
Duplex |
Fiber Optic Wavelength: |
1300 nm |
Ethernet Technology: |
Fast Ethernet |
Environmentally Friendly: |
Yes |
Power Source: |
Power Supply |
USB: |
No |
Number of PoE (RJ-45) Ports: |
1 |
Limited Warranty: |
Lifetime |
Form Factor: |
Wall Mountable |
Package Contents: |
|
Manufacturer Website Address: |
http://www.transition.com |
Network (RJ-45): |
Yes |
Total Number of Ports: |
2 |