Tripp Lite by Eaton
Eaton Tripp Lite Series SmartPro 1950VA 1950W 120V Line-Interactive Sine Wave UPS - 7 Outlets, Extended Run, Network Card Option, LCD, USB, DB9, 2U Rack/Tower Battery Backup SMART2200RM2U
- UPC:
- 037332150622
- MPN:
- SMART2200RM2U
- Shipping:
- Calculated at Checkout
Description
1.95kVA/1.95kW/120V Battery Backup for Distributed IT, Telecom or Enterprise Deployments
This rack-mount line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your IT equipment or destroy data. The SMART2200RM2U is ideal power management for high-end in-rack networking equipment, including servers, VoIP phones, data storage and PoE switches. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment.
Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages
The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting. Extra runtime is available by connecting up to four optional extended battery modules (BP72VRM2U, sold separately).
Optional LX Platform Network Management Card Allows Remote Access 24/7
The WEBCARDLXE network interface (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.
NEMA Outlets Protect Your Connected Components
One L5-20R and six 5-20R managed outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four 5-20R outlets are split into two independently switchable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.
Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions
AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART2200RM2U maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure.
- For remote monitor and control, the WEBCARDLXE is required (sold separately). Not compatible with WEBCARDLX.
- 2-line front-panel LCD with 10 selectable screens reports detailed UPS and site power info
- ENERGY STAR 2.0-certified to save electricity, lower costs and protect the environment
- Unity power factor ensures maximum power possible at each power rating
- Keeps equipment running during outages to allow time for file saves and safe shutdown
- Protects equipment against blackouts, brownouts, transient surges and line noise
Additional Information
DC System Voltage: |
72 V DC |
Software Included: |
PowerAlert software |
Energy Saving: |
Greater than 95% efficiency - GREEN UPS; Individually controllable load banks |
Backup/Run Time (Full Load): |
4 Minute |
Energy Star: |
Yes |
Manufacturer: |
Tripp Lite by Eaton |
Input Voltage Range: |
70 V AC - 153 V AC |
Rack Height: |
2U |
Output Frequency: |
60 Hz |
Typical Battery Recharge Time: |
4.50 Hour |
Waveform Type: |
Pure Sine Wave |
Input Frequency: |
60 Hz |
Product Type: |
Line-interactive UPS |
Replaceable Battery: |
Yes |
USB (HID Compliant) Port: |
Yes |
Output Voltage: |
100 V AC,110 V AC,120 V AC,125 V AC |
AVR: |
Yes |
Input Current: |
16.40 A |
Load Capacity (VA): |
1950 VA |
Receptacle Detail: |
6 x NEMA 5-20R,1 x NEMA L5-20R |
Phase: |
Single Phase |
Network Management: |
SNMP/Web |
Serial Port: |
Yes |
Sound Emission (A-Weighted): |
45 dB(A) |
EPO Port: |
Yes |
Transfer Time: |
4 ms |
Overload Protection: |
Yes |
Plug/Connector Type: |
NEMA 5-20P |
Cord Length: |
10 ft |
Surge Energy Rating: |
380 J |
Alarm: |
Remote Shutdown,UPS StartUp,Power Failure,Overload,UPS Fault,Low Battery |
Application/Usage: |
Data Storage,Server,Switch,IT Equipment |
Maximum Storage Elevation: |
32808 ft |
Hot Swappable: |
Yes |
Country of Origin: |
China |
Display: |
LCD |
Status Indicators: |
5 Front Panel Leds:
|
Product Line: |
SmartPro |
Packaged Quantity: |
1 Each |
Form Factor: |
Rack/Tower |
Package Contents: |
|
Manufacturer Website Address: |
https://tripplite.eaton.com/ |
Battery Chemistry: |
Lead Acid |
Product Model: |
SMART2200RM2U |
Backup/Run Time (Half Load): |
12 Minute |
Battery Characteristics: |
Valve-regulated |
Storage Temperature: |
5°F (-15°C) - 122°F (50°C) |
Receptacle Type: |
NEMA 5-20R,NEMA L5-20R |
TAA Compliant: |
Yes |
USB: |
Yes |
EMI/RFI Noise Filter: |
Yes |
Load Capacity (Watt): |
1950 W |
Output Power Factor: |
1 |
Environmental Certification: |
ENERGY STAR 2.0,RoHS |
Environmentally Friendly: |
Yes |
Additional Warranty Information: |
2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty. |
Input Voltage: |
120 V AC |
Limited Warranty: |
3 Year |