Satellite TV Accessories

The Perfect Vision PVDP3 is a high performance diplexer with outstanding specifications. It separates or combines off-air TV-Antenna and Satellite signals from or onto a single feed coaxial line. You will need one of these at each end of the cable. One...

PVFWC Flat Window Jumper is a rail-protected coaxial cable jumper assemblies for use in doors and window jams when drilling through walls is not permitted. The patent pending rail system protects the precision teflon coaxial cable from deformation due to...

Holland 144823 3.0GHz Flat Coax Cable for Windows and Doors Model  144823 Flat Window Jumper is a rail-protected coaxial cable jumper assemblies for use in doors  and window jams when drilling through walls is not permitted. The patent...

The Holland Electronics MoCA 4-Way Splitter for DirecTV is designed to Work Specifically in DIRECTV™, MoCA Enabled, Commercial MDU Environments. The MSAT Splitter Series was specifically designed to work in conjunction with DIRECTV’s™...

The Holland Electronics MoCA 2-Way Splitter for DirecTV is designed to Work Specifically in DIRECTV™, MoCA Enabled, Commercial MDU Environments. The MSAT Splitter Series was specifically designed to work in conjunction with DIRECTV’s™...

This low voltage Hot Shot dish heater kit will keep your satellite dish clear of ice and snow. It has a built-in sensor that turns on Heater in freezing conditions by a self adhesive heating element and will help prevent service outages due to signal...

Model HRD2 combine separate DBS signals from terrestrial TV signals.Filtering of undesired spurious interference and noise is extremely important when working with amplified signals containing both analog and digital signals.   ● ...

The DISH Network & DIRECTV Approved, STVC, provides low loss diplexing of DBS and TV signals, separating them prior to satellite receiver input. Filters harmonics in the off-air spectrum from satellite conversion devices.  Power Passing...

The Holland Electronics DPD2 allows the combining and/or separating of Off-Air / CATV signals with satellite signals toa common cable. Separates TV and satellite signals prior to satellite receiver input and filters harmonicsin the off-air spectrum from...

This Zinwell 2x4 Multiswitch MS2x4R0-03 allows you to combine signal from one satellite, using a dual LNBF and distribute the signal to up to 4 satellite receivers.   2x4 Multiswitch Two Satellite Inputs Four Receiver Outputs 75 Ohm...

DIRECT TV SL5 LNB, 2A power inserted and polarity locker 5 to 2400 MHz, Includes 24V 2 Amp power supply was HRPID1422A SITUATION The DIRECTV® (4) polarity SLSP-F SlimLine® dish with SL5 LNB to receiver distance exceeds 100...

The LA145A-T is used when DBS Ka/Ku or ATSC off-air signals are required at multiple locations connected via coax cable. Signal loss must be off-set. Model LA145A-T may be placed after a DBS dish or ATSC antenna to extend the signals the equivalent of...