Home & Office Security

This 10dB RF Attenuator reduces the level of all cellular signals either to the input of a 50-Ohm cellular booster or from the output of the cellular booster. Attenuator is 50-Ohm and features N-Female inputs and outputs. Requires optional coax cable...

This 20dB RF Attenuator reduces the level of all cellular signals either to the input of a 50-Ohm cellular booster or from the output of the cellular booster. Attenuator is 50-Ohm and features N-Female inputs and outputs. Requires optional coax cable...

The Model dmcFM Master Retrofit Mounting Frame (White) is used in retrofit intercom installations when replacing a master only system with a dmc3-4 Music/Communication Retrofit System Master or a dmc1 Music/Communication System Master in a 6-wire...

The Model dmc1H Wall Housing Kit offers many of the components needed to rough-in a dmc1 or dmc3-4 intercom system.

36" high ; 69 grid inches ;(two 34.5" columns) ; Side-mounting adjustable tabs; Fits between studs 14" wide ; Can be mounted upside down ; Four 2" & two .75" knockouts; Steel, painted whiteWarranty: Fifteen YearCountry of Origin: China

This 6dB RF Attenuator reduces the level of all cellular signals either to the input of a 50-Ohm cellular booster or from the output of the cellular booster. Attenuator is 50-Ohm and features N-Female inputs and outputs. Requires optional coax cable...

18" enclosure with the patented grid mounting system ; Features slot or tab mounting into the stud bay, single-gang electrical box knockout & 2 additional 2" ;conduit knockouts on the side rails ; Covers not includedWarranty: Fifteen YearsCountry of...

The Model HC18A 18" Enclosure Cover fits on the Model H318 structured wiring enclosure. The ventilated enclosure cover secures and protects the structured wiring components mounted inside the Model H318 enclosure. The cover is power coat painted bright...

The Model HC36A 36" Enclosure Cover fits on the Model H336 structured wiring enclosure. The ventilated enclosure cover secures and protects the structured wiring components mounted inside the Model H336 enclosure. The cover is power coat painted bright...

The Model H312KIT is an ETL Listed structured wiring service center enclosure featuring 19 grid inches of mounting capacity in two 9-1/2" columns. open house and channel plus structured wiring modules snap securely into the enclosure's mounting grid.