Below are the available bulk discount rates for each individual item when you purchase a certain amount
Panamax® M4315-PRO Power Management w/ Interactive Control and Real-Time Monitoring, BlueBOLT™ Enabled (15 Amp)
Meet your gear’s new boss. He’ll keep them under control and performing at their highest level. The Panamax® Home Theater Power Manager provides you a web-based power management interface that gives you control of any or all of the eight individual outlets using any Web browser or Web-enabled mobile device. This dramatically reduces your service calls and any wasted travel time thanks to its the remote access capability.
This device gives you eight outlets for protecting your equipment. The outlets are battery powered and surge protected insuring temporary, uninterrupted operation of connected equipment during a power failure.There is also protection provided for phone and Ethernet interfaces. Outlet banks 1 through 3 provide filtered power for outlets 1 through 6. Bank 4 (outlets 7 & 8) provides high current capability for powered subwoofers, amplifiers and A/V receivers.
Clean Power, Optimum Performance
Panamax’s patent pending AVM™ (Automatic Voltage Monitoring) circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing lightning bolt will be displayed in red in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.
Panamax's exclusive LiFT (Linear Filtration Technology) filters noise evenly across the entire frequency band, removing the harmonic noise that can keep high-performance equipment from performing at its peak.
The RS-232 serial port allows connection and communication between the UPS and an automation or computer system. This allows you to program a number of variables including the Critical Load Battery Threshold.
The BlueBOLT™ IP Communications Card comes pre-installed in the unit and is designed to connect to the internet directly through a switch or router. All connected devices are controlled through an easy-to-use interface at www.mybluebolt.com with no static IP addresses required. Once installed and configured, you will be able to access telemetry, control of individual outlets, and configure email alerts. The Remote Power Management technology provides secure, hosted IP (Internet Protocol) system control. BlueBOLT™ allows you to access several power management components via the internet.